Developing a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen that allows for a write-to-write experience, whilst you are away from home. This is because of the unique design of the pen. It has two tanks, one smaller than the other, that house the e juice and charged batteries. Once the user wants to write, he just places the pen in to the smaller tank and places the ink in the chamber where it’ll be vaporized. He simply turns on the pen and writes as if he is writing under a black mirror.
One of the greatest attributes of the Smok Pen is its ability to charge while it is on your desk. Simply because the coils on the Smok Pen are designed in a way to help keep the e juice from dripping onto the table or somewhere else. This is due to the 0.3-ohm coil that’s placed in the Smok Pen. The 0.3-ohm coil means that even the slightest of air currents won’t affect the writing process. It is because the electronic circuitry has protection built in so that it will not be suffering from extremely low voltage electric currents.
The Smok Pen could be charged internally with a charger or via the USB connection that is included with it. Because the electronic circuitry includes a safety barrier built in, therefore there is no risk involved when charging the device through the computer. The Smok Pen has a charging capacity of sixteen 50 mah batteries, that is ideal for all pens that use one or two batteries.
In order to keep the Smok Pen working for an extended time frame it is important that you do not overcharge the battery. Overcharging the battery will certainly reduce the voltage that is available and may eventually result in these devices malfunctioning. Overcharging the Smok Pen could also affect the vaporizing process. If you feel that Electric Tobacconist your battery is not getting the vapor it will, remove the pen from the energy source and let it cool down for a few minutes.
The fire button on the Smok Pen is situated in the bottom right corner of these devices. The fire button has an orange light, which indicates that it’s on. It is possible to press this button to activate the electronic heating element that will let you vaporize the oil. After you have done so you can remove the coil from the holder and place it in to the holder and place the Smok Pen in to the airflow chamber, which will cause the heating element to start out heating up and burning off the wick.
Once the coil is taken off the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are placed inside the holder and they get heated from the airflow. After they get hot they begin to turn blue, that is the indication that it is ready for the pen’s battery. Make sure that you place your sub-ohm in to the chamber before you push the fire button. If you don’t put the coil into the airflow chamber then your oil will leak and cause the leaking of e-juice.
Before you put the battery into the pen, you must ensure that you have disconnected all of the leads. Then you need to take out the Smok Pen’s cap and locate the leak or drip tip. You must clean this with a small cotton bud, to enable you to eliminate leak. Then reattach the cap back to the Smok Pen and you also will be ready to place the battery into the pen.
The ultimate section of the construction process may be the adapter plate, which fits into the Smok Vaporizer’s USB port. This plate lets you charge your e-juice through your computer, as long as you have an adapter for USB connection. I like this part since it allows me to charge my entire kit simultaneously without fretting about running out of power or constantly running out of e-juice.